What you need:
1. Black Card
2. Matte Photo paper
3. Full sheet label paper
4. (optional) Clear Sticky black plastic (Sold as 'No-laminator' laminator sheets)
5. Glue stick
6. Strong double sided tape or alternative to stick card corners
7. knife/scissors ruler etc

Making the box:
1. print 'BoxCardTemplate.png' and 'BoxCardTemplateInner.png'
2. use these to cut black card, use double sided tape (or other) to stick the corner flaps down to make two boxes 
The flaps should fold on the OUTSIDE - we will glue the photopaper over them!
check they fit inside each other!
3. Print the 'Box_Back_Printable(15.9cm x 19cm).png' and 'Box_Front_Printable(16.4cm x 19.6cm).png' onto photopaper, stick the sticky black plastic onto the photopaper to give it a glossy protective cover - cut the 
4. Use the gluestick to stick these to the OUTSIDE of the boxes you made before

Making the Disclabels:
1. print 'DiskPrintable (14.2cm x 7.15cm).png' onto the adhesive labels, cut with knife/ stickers and stick to disk, the disk should be BLACK
you won't NEED to print both, one is for 3.5 and the other is for 3 inch disk

Making the Manual:
1. Put a sheet of A4 photopaper in the printer - Print 'Manual_Printable1 (19cmx25.26cm).png' on the first side
2. let it dry, put it back in and print 'Manual_Printable2 (19cmx25.26cm).png' on the reverse
3. Cut the white edges off the paper, then cut horizontally down the middle
4. Staple the two halves with two staples in the middle.
	The correct order of the pages is:
	1.Cover pic
	2.Introduction
	3.Curse Collection
	4.Know your enemy
	5.Level 2 - forest
	6.Level 3 - river
	7.Level 4 - dark caves
	8.Disclaimer